Inquiry Basket (
Below is a group product of Steel Files.
Product List
Show all products
» Steel Files (Total 19 Products)
2. Adjustable Flexible File with Holder
Adjustble flexible file with holder
1: File with holder
2: For curved tooth files without tang
3: Can be ...
[Last Updated: 2009-12-10]
1: File with holder
2: For curved tooth files without tang
3: Can be ...
[Last Updated: 2009-12-10]3. Flexible Files (without Tang)
Flexible file
1: Ideal for smooth, rapid work on cast iron, bronze, lead, aluminium, zinc, plastics and ...
[Last Updated: 2009-12-10]
1: Ideal for smooth, rapid work on cast iron, bronze, lead, aluminium, zinc, plastics and ...
[Last Updated: 2009-12-10]4. Horse Rasp-Tanged
Horse rasp-tanged
1: Rasp teeth on one side, file teeth on opposite.
2: Thicker than plater's ...
[Last Updated: 2009-12-10]
1: Rasp teeth on one side, file teeth on opposite.
2: Thicker than plater's ...
[Last Updated: 2009-12-10]5. Horse Rasp-Plain
Horse rasp
1: Some farriers prefer this thin fine-toothed rasp for shoeing racetrack, riding horses and ...
[Last Updated: 2009-12-10]
1: Some farriers prefer this thin fine-toothed rasp for shoeing racetrack, riding horses and ...
[Last Updated: 2009-12-10]6. Shoe Rasp File
Shoe rasp file(four in hand file)
1: One side half round with 1/2 rasp cut and 1/2 file cut. One side flat ...
[Last Updated: 2009-12-10]
1: One side half round with 1/2 rasp cut and 1/2 file cut. One side flat ...
[Last Updated: 2009-12-10]7. Farmer's File
Farmer's file
1: General purpose file suited for agricultural use.
2: Length measured exclusive of ...
[Last Updated: 2009-12-10]
1: General purpose file suited for agricultural use.
2: Length measured exclusive of ...
[Last Updated: 2009-12-10]8. Mill Blunt File
Mill blunt file
1: Single cut on sides and edges
2: Also for draw-filing and finishing metals.
[Last Updated: 2009-12-10]
1: Single cut on sides and edges
2: Also for draw-filing and finishing metals.
[Last Updated: 2009-12-10]9. Mil Regularl File
Mill regular file
1: Tapers slightly in width.
2: Sides and edges are single cut.
3: It is suitable ...
[Last Updated: 2009-12-10]
1: Tapers slightly in width.
2: Sides and edges are single cut.
3: It is suitable ...
[Last Updated: 2009-12-10]10. Chain Saw File
Chain saw file
1: Parallel with special type teeth for fast and smooth sharpening.
2: For saw chain. ...
[Last Updated: 2009-12-10]
1: Parallel with special type teeth for fast and smooth sharpening.
2: For saw chain. ...
[Last Updated: 2009-12-10]11. Slim Taper File
Slim taper file
1: Single cut
2: Triangular in shape and tapered toward the point.
3: We have extra ...
[Last Updated: 2009-12-10]
1: Single cut
2: Triangular in shape and tapered toward the point.
3: We have extra ...
[Last Updated: 2009-12-10]12. Heavy Taper File
Heavy taper file
1: Single cut
2: Edges set and cut for filing gullets between saw teeth
3: Triangular ...
[Last Updated: 2009-12-10]
1: Single cut
2: Edges set and cut for filing gullets between saw teeth
3: Triangular ...
[Last Updated: 2009-12-10]13. Mill Regular File (BF1113)
1: Tapers slightly in width. Sides and edges are single cut.
2: It is suitable for workshops and ...
[Last Updated: 2009-12-10]
2: It is suitable for workshops and ...
[Last Updated: 2009-12-10]14. Square Files (BF1006)
1: The cross-section is square. It is double cut and tapers toward the point.
2: For filing grooves, ...
[Last Updated: 2009-12-10]
2: For filing grooves, ...
[Last Updated: 2009-12-10]15. Three Square Files (BF1005)
1: Triangular as the taper files but double cut with sharp corners slightly set and single cut edges.
2: ...
[Last Updated: 2009-12-10]
2: ...
[Last Updated: 2009-12-10]16. Round Files (BF1004)
1:Shape tapers slightly toward point.
2:Designed for enlarging circular holes,mouldings,concave ...
[Last Updated: 2009-12-10]
2:Designed for enlarging circular holes,mouldings,concave ...
[Last Updated: 2009-12-10]17. Half Round Files
1: Round on one side and flat on the other. The file tapers toward the point in both width and thickness. ...
[Last Updated: 2009-12-10]
[Last Updated: 2009-12-10]18. Flat Files (BF1002)
1: Tapered in width and thickness.
2: Double cut on both sides and single cut on edges.
3: Favored for ...
[Last Updated: 2009-12-10]
2: Double cut on both sides and single cut on edges.
3: Favored for ...
[Last Updated: 2009-12-10]19. Hand Files (BF1001)
1: Edges parallel in width and tapered slightly in thickness.
2: Double cut, one edge safe(uncut).
3: ...
[Last Updated: 2009-12-10]
2: Double cut, one edge safe(uncut).
3: ...
[Last Updated: 2009-12-10]